How to Start a De-Addiction & Rehabilitation Centre in India: SMHA Registration & Cost (2026)
November 14, 2026How to Start a Children’s Hospital in India: NICU, PICU, Licences & Cost (2026)
November 16, 2026How to Start an Orthopaedic & Joint Replacement Hospital in India: Licences, OT Design & Cost (2026)
India's ageing population, rising obesity and a steady stream of road-traffic trauma have made orthopaedics one of the highest-volume surgical specialties in private healthcare. Knee and hip replacements in particular have grown sharply since implant prices were capped, and many surgeons who built a reputation in a large hospital now want a focused ortho centre of their own.
An orthopaedic hospital is a surgical business first. The two things that decide whether it works are infection control in the joint-replacement OT, because a single prosthetic joint infection is clinically and financially devastating, and implant economics, because implant ceiling prices and package rates set a hard limit on margins. This guide covers licences, OT design, imaging, implant pricing, staffing and 2026 costs. For broader OT planning, see our operation theatre design guide.
In this guide ▾
- Base licence: clinical establishment registration under your state's Act, plus fire NOC, biomedical waste authorisation and a drugs licence for the in-house pharmacy.
- AERB registration is needed for every C-arm, X-ray and CT unit. Orthopaedics depends heavily on intra-operative fluoroscopy, so plan OT shielding from day one.
- The joint-replacement OT should be ultra-clean, with laminar airflow, HEPA filtration and positive pressure, and kept separate from trauma and septic cases.
- Knee implant prices are capped by NPPA. The ceiling has been extended year by year since 2017, so check the current notification when you build your package rates.
- Indicative 2026 capex for a 30–50 bed orthopaedic hospital is roughly ₹12–30 crore excluding land, with OTs and imaging the largest line items.
Step 1: Registration and core licences
An orthopaedic hospital registers as a clinical establishment under your state’s Act, in the same inpatient tier as any surgical hospital. See our Clinical Establishments Act guide and the full hospital licence checklist for the state-by-state process. The core set is:
- clinical establishment / nursing home registration;
- fire NOC, which is critical once you have OTs and inpatient floors (see our hospital fire safety guide);
- biomedical waste authorisation, covering anatomical waste from amputations and explanted hardware;
- a drugs licence for the pharmacy, and a blood storage arrangement for major trauma and revision surgery;
- AERB registration for all imaging equipment (see Step 3).
Step 2: Design the joint-replacement OT for infection control
Prosthetic joint infection is the outcome every ortho surgeon fears. It usually means revision surgery, long antibiotic courses and a damaged reputation. OT design is your first line of defence:
- Laminar airflow ceiling over the operating table, with HEPA filtration and positive pressure relative to the corridor;
- a dedicated arthroplasty OT that never takes infected or dirty cases. Run trauma, debridement and septic cases in a separate OT;
- enough OT size for C-arm movement, power tools, implant trolleys and navigation or robotic systems if you plan them later;
- a CSSD that can handle heavy loaned implant sets, which vendors deliver per case and which need tracked reprocessing;
- restricted traffic, because every door opening disturbs the clean airflow. The design should cut movement during the case.
Our facility layout team plans the OT block, CSSD and implant store as one flow. Our MEP partners specify the air-handling, which is where most ortho OTs fall short.
Robotic-assisted knee and hip replacement is spreading quickly in Indian private hospitals. Even if you won't buy a robot on day one, size at least one OT, its power points and its storage so that a robot can be added later without rebuilding.
Step 3: Imaging and AERB registration
Orthopaedics depends on imaging more than most surgical specialties:
| Equipment | Use | Regulatory note |
|---|---|---|
| C-arm (image intensifier / flat panel) | Intra-operative fracture fixation, spine, nailing | AERB registration. OT walls and doors need shielding, and staff need lead aprons and TLD badges |
| Digital X-ray (DR) | OPD, fracture clinic, post-op checks | AERB registration with an approved room layout |
| CT scan | Complex fractures, spine, pre-op planning | AERB registration with a shielded room |
| MRI | Ligament, cartilage and spine soft tissue | Not ionising, so no AERB. Needs RF shielding and a site plan |
| BMD / DEXA | Osteoporosis assessment | Uses X-ray, so check AERB requirements for your model |
File AERB registration as soon as you order the equipment, not after it arrives. For the full process, see our cath lab guide, which walks through the eLORA stages that also apply to C-arms.
Step 4: Implant economics and package pricing
Implants are the largest variable cost in a joint replacement, and in India their prices are regulated:
- Knee implants are under an NPPA ceiling price. The National Pharmaceutical Pricing Authority first capped them in August 2017 and has extended the ceiling year by year since. The most recent extension we could confirm ran to 15 November 2026, so check whether a new notification has been issued before you finalise package rates;
- coronary stents are also price-capped, which matters if your ortho hospital is part of a multi-specialty plan;
- hip, spine and trauma implants are not under the same ceiling, so negotiate them directly with vendors;
- PM-JAY and insurer packages fix what you are paid per procedure. Model implant cost, OT time and length of stay against these packages before you commit to volumes (see our empanelment guide).
Keep an implant register that tracks every implant by lot and batch against the patient. Insurers and regulators expect this, and it is essential if a product is ever recalled.
Step 5: Hospital layout and patient flow
Ortho patients are often elderly, in pain or on walkers, so accessibility shapes the whole building: wide doors and corridors, ramps rather than steps, bariatric-ready beds, grab bars in every toilet and lifts big enough for a bed plus traction. Patients should also be mobilised on the day of surgery or the next day, so put an inpatient rehab gym on the same floor as the post-op ward.
Step 6: Staffing
| Role | Coverage |
|---|---|
| Orthopaedic surgeons | Arthroplasty, trauma, spine, sports/arthroscopy as your specialty mix demands |
| Anaesthetists | Regional blocks are central to fast-track joint replacement |
| Intensivist / physician | Medical optimisation of elderly patients before and after surgery |
| OT nurses & technicians | Trained in implant handling, C-arm positioning and aseptic technique |
| Physiotherapists | Day-1 mobilisation and discharge rehab |
| Radiographers | AERB-compliant C-arm and X-ray operation |
Our HR mobilisation team recruits OT and nursing teams, and our equipment procurement team sources OT tables, C-arms, power systems and laminar-flow units against one specification.
Planning an orthopaedic hospital?
Get a laminar-flow OT design, imaging plan and 2026 cost estimate.
What does an orthopaedic hospital cost in 2026?
| Scale | Indicative project cost (excl. land) |
|---|---|
| Ortho day-care / arthroscopy centre (1-2 OTs, few beds) | ₹3–7 crore |
| Orthopaedic hospital (30-50 beds, 2-3 OTs incl. laminar flow) | ₹12–30 crore |
| Bone & joint centre of excellence (75+ beds, robotics, CT/MRI) | ₹35–70 crore+ |
For per-bed benchmarks, see our hospital construction cost per bed guide. Modular laminar-flow OTs, the C-arm and the CT/MRI usually take the largest share of equipment capex.
Launch checklist
- Lock your specialty mix: arthroplasty, trauma, spine, sports medicine.
- Register as a clinical establishment and get fire NOC and BMW authorisation.
- Design a dedicated laminar-flow arthroplasty OT, kept separate from trauma and septic OTs.
- File AERB registration for the C-arm, X-ray and CT before installation.
- Model implant costs against the current NPPA ceiling and PM-JAY/insurer package rates.
- Plan the post-op ward and rehab gym for day-of-surgery mobilisation.
- Recruit surgeons, anaesthetists, OT staff and physiotherapists.
- Set up an implant register and infection-surveillance programme before the first case.
Frequently asked questions
Is a laminar-flow OT mandatory for joint replacement in India?
There is no single national rule that makes it mandatory for every hospital, but ultra-clean air with laminar flow and HEPA filtration is widely regarded as best practice for arthroplasty. Accreditation assessors and insurers increasingly expect strong infection-control infrastructure for implant surgery.
Does a C-arm need AERB registration?
Yes. A C-arm is X-ray equipment, so it must be registered with AERB before use. The OT needs suitable shielding, and staff working with it need radiation protection and personal dosimeters.
Are knee implant prices still capped in India?
NPPA has capped knee implant prices since August 2017 and has extended the ceiling year by year. The latest extension we could confirm ran to 15 November 2026, so check NPPA's website for any newer notification before you set your package prices.
How many beds does an orthopaedic hospital need?
Joint replacement patients now often stay only a few days, so a focused ortho hospital can run on 30-50 beds with 2-3 OTs. Bed numbers matter less than OT throughput, rehab capacity and a few HDU beds for elderly or complex patients.
Can I start as an ortho day-care centre and expand later?
Yes. Many surgeons start with an arthroscopy and minor-procedure day-care centre, then add inpatient beds and a laminar-flow arthroplasty OT once volumes build. Design the site so that later expansion is possible without rebuilding the OT block.
Plan your orthopaedic hospital with Hospertz
Laminar-flow OT design, imaging, implant-economics modelling and licensing, from concept to commissioning.
Keep reading
Cost figures are indicative 2026 planning ranges, not quotations. NPPA ceiling prices, AERB requirements and state licensing rules change from time to time, so confirm current requirements before you apply or price packages. This article is general information, not legal or financial advice.
Get an OT design and cost plan from our planning team.
Free consultationWhatsApp us